WEB-BASED FORTINET NSE7_PBC-7.2 PRACTICE TEST - COMPATIBLE WITH ALL MAJOR BROWSERS

Web-Based Fortinet NSE7_PBC-7.2 Practice Test - Compatible with All Major Browsers

Web-Based Fortinet NSE7_PBC-7.2 Practice Test - Compatible with All Major Browsers

Blog Article

Tags: Free NSE7_PBC-7.2 Practice, Test NSE7_PBC-7.2 Guide, Actual NSE7_PBC-7.2 Test Pdf, NSE7_PBC-7.2 Reliable Dump, NSE7_PBC-7.2 Valid Test Labs

What's more, part of that Real4Prep NSE7_PBC-7.2 dumps now are free: https://drive.google.com/open?id=1oKO0wrLyZlTdIahwvqq7gGppYeVVoQBV

The NSE7_PBC-7.2 PDF works on smart phones, tablets, and laptops. Windows computers support the NSE7_PBC-7.2 desktop practice test software. No software installation is necessary for the web-based Fortinet Exam practice exam. All operating systems (Mac, Linus, Android, iOS, Windows) and major browsers support the NSE7_PBC-7.2 web-based practice exam.

Our NSE7_PBC-7.2 PDF format is user-friendly and accessible on any smart device, allowing applicants to study from anywhere at any time. We have included actual and updated Fortinet NSE7_PBC-7.2 Questions in this NSE7_PBC-7.2 Dumps PDF file. Our Fortinet NSE 7 - Public Cloud Security 7.2 exam dumps PDF format is designed to help individuals acquire the knowledge necessary to succeed in the test.

>> Free NSE7_PBC-7.2 Practice <<

Test NSE7_PBC-7.2 Guide & Actual NSE7_PBC-7.2 Test Pdf

The advent of our NSE7_PBC-7.2 study guide with three versions has helped more than 98 percent of exam candidates get the certificate successfully. Rather than insulating from the requirements of the NSE7_PBC-7.2 real exam, our NSE7_PBC-7.2 practice materials closely co-related with it. And their degree of customer’s satisfaction is escalating. Besides, many exam candidates are looking forward to the advent of new NSE7_PBC-7.2 versions in the future.

Fortinet NSE 7 - Public Cloud Security 7.2 Sample Questions (Q50-Q55):

NEW QUESTION # 50
Refer to the exhibit
You are deploying two FortiGate VMS in HA active-passive mode with load balancers in Microsoft Azure Which two statements are true in this load balancing scenario? (Choose two.)

  • A. A dedicated management interface can be used for load balancing.
  • B. The FortiGate public IP is the next-hop for all the traffic.
  • C. You must add a route to the Microsoft VIP used for the health check.
  • D. An internal load balancer listener is the next-hop for outgoing traffic.

Answer: C,D

Explanation:
A is incorrect because the FortiGate public IP is not the next-hop for all the traffic. The FortiGate public IP is only used for incoming traffic from the internet. The Azure load balancer distributes the incoming traffic to the active FortiGate VM based on a health probe123. The FortiGate public IP is not used for outgoing traffic or internal traffic.
B is correct because an internal load balancer listener is the next-hop for outgoing traffic. The internal load balancer listener is configured with a floating IP address that is assigned to the active FortiGate VM. The internal load balancer listener also has a health probe to monitor the status of the FortiGate VMs123. The internal load balancer listener forwards the outgoing traffic to the internet through the public load balancer.
C is incorrect because you do not need to add a route to the Microsoft VIP used for the health check. The Microsoft VIP is an internal IP address that is used by the Azure load balancer to send health probes to the FortiGate VMs123. The Microsoft VIP is not reachable from outside the Azure network and does not require any routing configuration on the FortiGate VMs.
D is correct because a dedicated management interface can be used for load balancing. In this deployment, port4 is used as a dedicated management interface that connects to the management network3. The dedicated management interface can be used to access the FortiGate VMs for configuration and monitoring purposes. The dedicated management interface can also be used to synchronize the configuration and session information between the primary and secondary devices in an HA cluster2.


NEW QUESTION # 51
Refer to the exhibit

You are tasked with deploying a webserver and FortiGate VMS in AWS_ You are using Terraform to automate the process Which two important details should you know about the Terraform files? (Choose two.)

  • A. You must specify all the AWS credentials in the output. of file.
  • B. All the output values are available after a successful terraform apply command
  • C. The subnet_private 1 value is defined in the variables . tf file
  • D. After the deployment, Terraform output values are visible only through AWS CloudShell.

Answer: B,C

Explanation:
Explanation
A: All the output values are available after a successful terraform apply command. This means that after the deployment, you can view the output values by running terraform output or terraform show in the same directory where you ran terraform apply1. You can also use the output values in other Terraform configurations or external systems by using the terraform output command with various options2. B. The subnet_private_1 value is defined in the variables.tf file. This means that the subnet_private_1 value is an input variable that can be customized by passing a different value when running terraform apply or by setting an environment variable3. The variables.tf file is where you declare all the input variables for your Terraform configuration4.
The other options are incorrect because:
After the deployment, Terraform output values are not visible only through AWS CloudShell. You can access them from any shell or terminal where you have Terraform installed and configured with your AWS credentials.
You do not need to specify all the AWS credentials in the output.tf file. The output.tf file is where you declare all the output values for your Terraform configuration4. You can specify your AWS credentials in a separate file, such as provider.tf, or use environment variables or shared credentials files. References:
Output Values - Configuration Language | Terraform - HashiCorp Developer Command: output - Terraform by HashiCorp Input Variables - Configuration Language | Terraform - HashiCorp Developer Configuration Language | Terraform - HashiCorp Developer


NEW QUESTION # 52
Refer to the exhibit

A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Linux1 and Linux2 instances to the internet through the security VPC (virtual private cloud). The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface. Assume there are no issues with the Transit Gateway (TGW) configuration Which two settings must the customer add to correct the issue? (Choose two.)

  • A. Both landing subnets in the security VPC must have a 0.0.0.0/0 traffic route to the FortiGate port2.
  • B. Both landing subnets in the spoke VPCs must have a 0.0 00/0 traffic route to the TGW
  • C. The four landing subnets in all the VPCs must have a 0.0 0 0/0 traffic route to the TGW
  • D. Both landing subnets in the spoke VPCs must have a 0.0.0.0/0 traffic route to the Internet Gateway (IOW).

Answer: A,B

Explanation:
The correct answer is B and C. Both landing subnets in the spoke VPCs must have a 0.0.0.0/0 traffic route to the TGW. Both landing subnets in the security VPC must have a 0.0.0.0/0 traffic route to the FortiGate port2.
According to the AWS documentation for Transit Gateway, a transit gateway is a network transit hub that connects VPCs and on-premises networks. To send outbound traffic from the Linux instances to the internet through the security VPC, you need to do the following steps:
In the main subnet routing table in the spoke VPCs, add a new route with destination 0.0.0.0/0, next hop TGW. This route directs all traffic from the Linux instances to the TGW, which can then forward it to the appropriate destination based on the TGW route table.
In the main subnet routing table in the security VPC, add a new route with destination 0.0.0.0/0, next hop FortiGate port2. This route directs all traffic from the TGW to the FortiGate internal interface, where it can be inspected and allowed by the FortiGate policies.
The other options are incorrect because:
Adding a 0.0.0.0/0 traffic route to the Internet Gateway (IGW) in the spoke VPCs is not correct, as this would bypass the TGW and the security VPC and send all traffic directly to the internet.
Adding a 0.0.0.0/0 traffic route to the TGW in all the VPCs is not necessary, as only the spoke VPCs need to send traffic to the TGW. The security VPC needs to send traffic to the FortiGate port2.
: Transit Gateways - Amazon Virtual Private Cloud : Fortinet Documentation Library - Deploying FortiGate VMs on AWS


NEW QUESTION # 53
Which two Amazon Web Services (AWS) features support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)

  • A. A NAT gateway with an EIP
  • B. An Internet gateway with an EIP
  • C. A transit gateway with an attachment
  • D. A transit VPC

Answer: C,D


NEW QUESTION # 54
Refer to the exhibit

You are tasked with deploying a webserver and FortiGate VMS in AWS_ You are using Terraform to automate the process Which two important details should you know about the Terraform files? (Choose two.)

  • A. You must specify all the AWS credentials in the output. of file.
  • B. All the output values are available after a successful terraform apply command
  • C. The subnet_private 1 value is defined in the variables . tf file
  • D. After the deployment, Terraform output values are visible only through AWS CloudShell.

Answer: B,C

Explanation:
A: All the output values are available after a successful terraform apply command. This means that after the deployment, you can view the output values by running terraform output or terraform show in the same directory where you ran terraform apply1. You can also use the output values in other Terraform configurations or external systems by using the terraform output command with various options2. B. The subnet_private_1 value is defined in the variables.tf file. This means that the subnet_private_1 value is an input variable that can be customized by passing a different value when running terraform apply or by setting an environment variable3. The variables.tf file is where you declare all the input variables for your Terraform configuration4.
The other options are incorrect because:
* After the deployment, Terraform output values are not visible only through AWS CloudShell. You can access them from any shell or terminal where you have Terraform installed and configured with your AWS credentials.
* You do not need to specify all the AWS credentials in the output.tf file. The output.tf file is where you declare all the output values for your Terraform configuration4. You can specify your AWS credentials in a separate file, such as provider.tf, or use environment variables or shared credentials files. References:
* Output Values - Configuration Language | Terraform - HashiCorp Developer
* Command: output - Terraform by HashiCorp
* Input Variables - Configuration Language | Terraform - HashiCorp Developer
* Configuration Language | Terraform - HashiCorp Developer


NEW QUESTION # 55
......

Almost everyone is trying to get Fortinet NSE 7 - Public Cloud Security 7.2 (NSE7_PBC-7.2) certification to update their CV or get the desired job. Nowadays, everyone is interested in taking the Fortinet NSE 7 - Public Cloud Security 7.2 (NSE7_PBC-7.2) exam because it has multiple benefits for the future. Every candidate faces just one problem, and that is not getting updated Fortinet NSE 7 - Public Cloud Security 7.2 (NSE7_PBC-7.2) practice questions.

Test NSE7_PBC-7.2 Guide: https://www.real4prep.com/NSE7_PBC-7.2-exam.html

As a matter of fact, as long as you look through the Pages on the Internet, you will be aware of the fact that our NSE7_PBC-7.2 torrent PDF files enjoy high public praise as a result of its high pass rate, Now make the achievement of Fortinet Certification NSE7_PBC-7.2 NSE 7 Network Security Architect certification easy by using these NSE7_PBC-7.2 exam questions dumps because the success is in your hands now, Fortinet Free NSE7_PBC-7.2 Practice If you are willing to give us a trust, we will give you a success.

Lighting and Accessory System, Shutting Down Actual NSE7_PBC-7.2 Test Pdf an App, As a matter of fact, as long as you look through the Pages on the Internet, you will be aware of the fact that our NSE7_PBC-7.2 Torrent PDF files enjoy high public praise as a result of its high pass rate.

High-quality Fortinet - Free NSE7_PBC-7.2 Practice

Now make the achievement of Fortinet Certification NSE7_PBC-7.2 NSE 7 Network Security Architect certification easy by using these NSE7_PBC-7.2 exam questions dumps because the success is in your hands now.

If you are willing to give us a trust, we will give you a NSE7_PBC-7.2 success, Above all, Real4Prep also offers a full refund guarantee (terms and conditions apply) to our customers.

What's more, you'll get compensation if you failed.

P.S. Free & New NSE7_PBC-7.2 dumps are available on Google Drive shared by Real4Prep: https://drive.google.com/open?id=1oKO0wrLyZlTdIahwvqq7gGppYeVVoQBV

Report this page